Filters: Keyword is Automation  [Clear All Filters]
2014
van der Zee, Aant, Bauke de Vries, and Theo Salet. "From rapid prototyping to automated manufacturing." In Fusion, Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe, 455-461. Vol. 1. eCAADe: Conferences 1. Newcastle upon Tyne, UK: Northumbria University, 2014.
Dieckmann, Andreas, and Peter Russell. "The Truth Is In The Model - Utilizing Model Checking to Rate Learning Success in BIM Software Courses." In Fusion, Proceedings of the 32nd International Conference on Education and research in Computer Aided Architectural Design in Europe, 417-426. Vol. 2. eCAADe: Conferences 2. Newcastle upon Tyne, UK: Northumbria University, 2014.
2013
Andia, Alfredo. "Automated Architecture: Why CAD, Parametrics and Fabrication are Really old News." In Knowledge-based Design - Proceedings of the 17th Conference of the Iberoamerican Society of Digital Graphics, 83-87. SiGraDi. Valparaiso, Chile, 2013.
Dritsas, Stylianos, Raul Kalvo, and Andres Sevtsuk. "Packing Optimization for Digital Fabrication." In Computation and Performance - Proceedings of the 31st eCAADe Conference, 655-664. Vol. 1. eCAADe: Conferences 1. Delft, The Netherlands: Delft University of Technology, 2013.
2012
Chok, Kermin. "Automation at scale: Geometry, analysis and post processing." In Beyond codes and pixels: Proceedings of the 17th International Conference on Computer-Aided Architectural Design Research in Asia, 17-26. CAADRIA. Chennai, India: The Association for Computer-Aided Architectural Design Research in Asia, 2012.
2010
Grasl, Thomas, and Athanassios Economou. "Palladian Graphs: Using a graph grammar to automate the Palladian grammar." In Future cities: 28th eCAADe Conference Proceedings, 275-283. eCAADe: Conferences. Zurich, Switzerland: ETH Zurich, 2010.
2009
Rappaport, Nina. "Real Time / Implication for Production Spaces." In reForm( ) - Building a Better Tomorrow: Proceedings of the 29th Annual Conference of the Association for Computer Aided Design in Architecture (ACADIA), 186-193. ACADIA. Chicago, Illinois: The School of the Art Institute of Chicago, 2009.
Henriques, Goncalo, José Duarte, and António Brito. "TetraScript: Development of an Integrated System Capable of Optimizing Light in a Circumscribed Space." In Computation: The New Realm of Architectural Design: 27th eCAADe Conference Proceedings, 31-38. eCAADe: Conferences. Istanbul, Turkey: Istanbul Technical University, Faculty of Architecture, 2009.
2008
Bernal, Marcelo, and Ellen Yi- Luen Do. "Variation from Repetition ." In Architecture 'in computro' - Integrating Methods and Techniques: 26th eCAADe Conference Proceedings, 791-798. eCAADe: Conferences. Antwerpen, Belgium: The Higher Institute of Architectural Sciences, Henry van de Velde, 2008.
2000
Woodbury, Robert F., Andrew Burrow, Robin Drogemuller, and Sambit Datta. "Code Checking by Representation Comparison." In Proceedings of the Fifth Conference on Computer-Aided Architectural Design Research in Asia, 235-244. CAADRIA. Singapore: National University of Singapore, 2000.
Kim, Young-Suk, and Carl Haas. A model for automation of infrastructure maintenance using representational forms In Automation in Construction. Vol. 10. AutoCon 10. ELSEVIER, 2000.
Navon, R.. Process and quality control with a video camera, for a floor-tilling robot In Automation in Construction. Vol. 10. AutoCon 10. ELSEVIER, 2000.
Sacks, R., A. Warszawski, and Uri Kirsch. Structural design in an automated building system In Automation in Construction. Vol. 10. AutoCon 10. ELSEVIER, 2000.
1999
Moselhi, O., and T. Shehab-Eldeen. Automated detection of surface defects in water and sewer pipes In Automation in Construction. Vol. 8. AutoCon 8. ELSEVIER, 1999.
1998
Rosenfeld, Y., and A. Shapira. Automation of existing tower cranes: economic and technological feasibility In Automation in Construction. Vol. 7. AutoCon 7. ELSEVIER, 1998.
Lorenc, S.J., and L.E. Bernold. Excavator-mounted ordnance locating system using electromagnetic sensing technology In Automation in Construction. Vol. 7. AutoCon 7. ELSEVIER, 1998.
Sobczyk, A., and G. Tora. Grader blade stabilization system In Automation in Construction. Vol. 7. AutoCon 7. ELSEVIER, 1998.
1997
Seward, D.W., J.N. Scott, R. Dixon, J.D. Findlay, and H. Kinniburgh. The automation of piling rig positioning using satellite GPS In Automation in Construction. Vol. 6. AutoCon 6. ELSEVIER, 1997.
Navon, R., and A. Retik. Programming construction robots using virtual reality techniques In Automation in Construction. Vol. 5. AutoCon 5. ELSEVIER, 1997.
Shohet, I.M., and Y. Rosenfeld. Robotic mapping of building interior--precision analysis In Automation in Construction. Vol. 7. AutoCon 7. ELSEVIER, 1997.
1996
Beliveau, Y.J., J.E. Fithian, and M.P. Deisenroth. Autonomous vehicle navigation with real-time 3D laser based positioning for construction In Automation in Construction. Vol. 5. AutoCon 5. ELSEVIER, 1996.
Haas, C.. Evolution of an automated crack sealer: a study in construction technology development In Automation in Construction. Vol. 4. AutoCon 4. ELSEVIER, 1996.
Hui-Ping, T., D. Veeramani, R. Kunigahalli, and J.S. Russell. OPSALC: a computer-integrated operations planning system for autonomous landfill compaction In Automation in Construction. Vol. 5. AutoCon 5. ELSEVIER, 1996.
Navon, R.. Teaching automation as part of the construction curriculum In Automation in Construction. Vol. 5. AutoCon 5. ELSEVIER, 1996.
Beliveau, Y.J.. What can real-time positioning do for construction? In Automation in Construction. Vol. 5. AutoCon 5. ELSEVIER, 1996.
1995
Navon, R.. Conceptual design of a flooring robot: development methodology and results In Automation in Construction. Vol. 4. AutoCon 4. ELSEVIER, 1995.
Navon, R., Y. Rubinovitz, and M. Coffler. Development of a fully automated rebar-manufacturing machine In Automation in Construction. Vol. 4. AutoCon 4. ELSEVIER, 1995.
1990
Tham, K.W., H.S. Lee, and John S. Gero. "Building Envelope Design Using Design Prototypes.", 1990.
Galle, Per. A language of Abstract Floor Plans In Environment and Planning B: Planning and Design. EPB. London, UK: Pion Ltd, 1990.
1988
Birmingham, William, and Daniel Siewiorek. Automated knowledge Acquisition for a Computer Hardware Synthesis System. EDRC, 1988.
Giraud, Christian, and Stephane Hanrot. "Elements for Spatial Reasoning in Construction." In Robotics in Construction, International Symposium: 5th: 1988: Tokyo, Japan, 105-113., 1988.
Woodbury, Robert F., Stephen Fenves, and Nelson Baker. "Geometric Reasoning in Computer Integrated Building Construction." In Robotics in Construction, International Symposium: 5th: 1988: Tokyo, Japan, 115-124. Tokyo, Japan, 1988.
Birmingham, William, Anurag Gupta, and Daniel Siewiorek. "The MICON System for Computer Design.", 11. Pittsburg. Pennsylvania - USA: CMU, 1988.
1987
Mitchell, J.R., and Anthony Radford. EAVE, a Generative Expert System for Detailing In Environment and Planning B: Planning and Design. EPB. London, UK: Pion Ltd, 1987.
1986
Galle, Per. Abstraction as a Tool of Automated Floor-Plan Design In Environment and Planning B: Planning and Design. EPB. London, UK: Pion Ltd, 1986.
Radford, Anthony, and J.R. Mitchell. "Automated Architectural Detailing: a Knowledge Based Approach,.", 73-77., 1986.
Wright, Paul. "A Manufacturing Hand.", 13-23., 1986.
1985
Jones, Gerald. "Can Creativity be Automated." Computer Graphics World (1985): 72-80.
Cass, Christopher. "Creativity and Automation: Thoughtful Training Guarantees Room for Both." Computer Graphics World (1985): 33-34,36.
1983
Kant, Elaine, and Allen Newell. An Automatic Algorithm Designer: an Initial Implementation., 1983.
Galle, Per. "A Theorem Relating to Exhaustive Generation of Floor Plans." In Bulletin of Computer Aided Architectural Design. May, 1983., 30-33:ill., 1983.
Tomkinson, James. "UCAD: Building Design Automation with General Purpose Software Tools on UNIX." In ACM IEEE Design Automation Conference Proceedings: 20th ACM/EDAC/IEEE , 778. IEEE. Miami Beach, Florida: IEEE Computer Society, 1983.

Pages